Legend Tuned · ECU Software

Motorcycle

KTM 1290 Super Duke GT (2019–2023) 1290 Super Duke GT 175 HP ECU Software & Chip Tuning

  • 2019–2023
  • Petrol
  • 175 HP · 141 Nm

Target with Legend Tuned Stage 1: 184 HP / 147 Nm; with Stage 2: 193 HP / 151 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +9 HP +5%
184 HP Stock 175 HP · 129 → 135 kW
Stock
175 HP
Stage 1
184 HP
Torque +6 Nm +4%
147 Nm Stock 141 Nm
Stock
141 Nm
Stage 1
147 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

KTM 1290 Super Duke GT (2019–2023) 175 HP — stok ve Stage değerleri
Value Stock Stage 1 Stage 2
Power175 HP184 HP193 HP
Power (kW)129 kW135 kW142 kW
Torque141 Nm147 Nm151 Nm
Power gain—+9 HP (+5%)+18 HP (+10%)
Torque gain—+6 Nm (+4%)+10 Nm (+7%)
Vehicle
KTM 1290 Super Duke GT (2019–2023)
Type
Motorcycle
Engines
1290 Super Duke GT
Years
2019–2023
Fuel
Petrol

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 8 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with exhaust and air filter

At Stage 2, the engine's breathing is freed up with hardware: the exhaust and air filter are upgraded, and the software is written to match that hardware. The target for this engine is 193 HP / 151 Nm.

  • Exhaust systemA slip-on or full exhaust system; the software is written for the exhaust fitted.
  • Air filterA high-flow sport air filter; the airbox inlet is modified if needed.
  • Datalog & fine-tuningAir/fuel ratio and ignition are logged during a road or off-road test; fine-tuning is done if needed.
  • Health checkIgnition, fuel system, clutch / CVT belt and cooling checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — ignition, air/fuel ratio and engine temperature are recorded and checked during a road or off-road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

KTM 1290 Super Duke GT (2019–2023)

Other engines in the same generation

All engines table

No other engines are listed for this generation.

Other 1290 Super Duke GT generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 184 HP +9
Book an appointment