Legend Tuned · Chip Tuning

Volkswagen Transporter T5.1 (GP) 2.0 TSI 150 HP Chip Tuning

  • 2009–2015
  • Petrol
  • 150 HP · 280 Nm
  • ECU: Bosch ME7.1.1

Target with Legend Tuned Stage 1: 240 HP / 360 Nm; with Stage 2: 265 HP / 390 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +90 HP +60%
240 HP Stock 150 HP · 110 → 177 kW
Stock
150 HP
Stage 1
240 HP
Torque +80 Nm +29%
360 Nm Stock 280 Nm
Stock
280 Nm
Stage 1
360 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Volkswagen Transporter T5.1 (GP) 2.0 TSI 150 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power150 HP240 HP265 HP
Power (kW)110 kW177 kW195 kW
Torque280 Nm360 Nm390 Nm
Power gain—+90 HP (+60%)+115 HP (+77%)
Torque gain—+80 Nm (+29%)+110 Nm (+39%)
Vehicle
Volkswagen Transporter T5.1 (GP)
Engines
2.0 TSI
Years
2009–2015
Fuel
Petrol
ECU
Bosch ME7.1.1

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 6 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 265 HP / 390 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Volkswagen Transporter T5.1 (GP)

Other engines in the same generation

All engines table

Other Transporter generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 240 HP +90
Book an appointment