Legend Tuned · Chip Tuning

Volkswagen Golf 6 (MK6) 2.0 TDI 110 HP Chip Tuning

  • 2008–2012
  • Diesel
  • 110 HP · 250 Nm
  • ECU: Bosch EDC17C46

Target with Legend Tuned Stage 1: 180 HP / 360 Nm; with Stage 2: 200 HP / 395 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +70 HP +64%
180 HP Stock 110 HP · 81 → 132 kW
Stock
110 HP
Stage 1
180 HP
Torque +110 Nm +44%
360 Nm Stock 250 Nm
Stock
250 Nm
Stage 1
360 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Volkswagen Golf 6 (MK6) 2.0 TDI 110 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power110 HP180 HP200 HP
Power (kW)81 kW132 kW147 kW
Torque250 Nm360 Nm395 Nm
Power gain—+70 HP (+64%)+90 HP (+82%)
Torque gain—+110 Nm (+44%)+145 Nm (+58%)
Vehicle
Volkswagen Golf 6 (MK6)
Engines
2.0 TDI
Years
2008–2012
Fuel
Diesel
ECU
Bosch EDC17C46

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 6 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 200 HP / 395 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Volkswagen Golf 6 (MK6)

Other engines in the same generation

All engines table

Other Golf generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 180 HP +70
Book an appointment