Legend Tuned · ECU Software

Motorcycle

Triumph Street Triple 765 (2017–2019) 765 R 118 HP ECU Software & Chip Tuning

  • 2017–2019
  • Petrol
  • 118 HP · 77 Nm

Target with Legend Tuned Stage 1: 125 HP / 81 Nm; with Stage 2: 132 HP / 84 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +7 HP +6%
125 HP Stock 118 HP · 87 → 92 kW
Stock
118 HP
Stage 1
125 HP
Torque +4 Nm +5%
81 Nm Stock 77 Nm
Stock
77 Nm
Stage 1
81 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Triumph Street Triple 765 R (2017–2019) 118 HP — stok ve Stage değerleri
Value Stock Stage 1 Stage 2
Power118 HP125 HP132 HP
Power (kW)87 kW92 kW97 kW
Torque77 Nm81 Nm84 Nm
Power gain—+7 HP (+6%)+14 HP (+12%)
Torque gain—+4 Nm (+5%)+7 Nm (+9%)
Vehicle
Triumph Street Triple 765 (2017–2019)
Type
Motorcycle
Engines
765 R
Years
2017–2019
Fuel
Petrol

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 7 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with exhaust and air filter

At Stage 2, the engine's breathing is freed up with hardware: the exhaust and air filter are upgraded, and the software is written to match that hardware. The target for this engine is 132 HP / 84 Nm.

  • Exhaust systemA slip-on or full exhaust system; the software is written for the exhaust fitted.
  • Air filterA high-flow sport air filter; the airbox inlet is modified if needed.
  • Datalog & fine-tuningAir/fuel ratio and ignition are logged during a road or off-road test; fine-tuning is done if needed.
  • Health checkIgnition, fuel system, clutch / CVT belt and cooling checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — ignition, air/fuel ratio and engine temperature are recorded and checked during a road or off-road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Triumph Street Triple 765 (2017–2019)

Other engines in the same generation

All engines table

Other Street Triple generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 125 HP +7
Book an appointment