Legend Tuned · ECU Software

Motorcycle

Kawasaki Ninja 1100SX / SE (2025–) 1099 cc 4-Cylinder 136 HP ECU Software & Chip Tuning

  • 2025–present
  • Petrol
  • 136 HP · 113 Nm

Target with Legend Tuned Stage 1: 146 HP / 119 Nm; with Stage 2: 152 HP / 123 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +10 HP +7%
146 HP Stock 136 HP · 100 → 107 kW
Stock
136 HP
Stage 1
146 HP
Torque +6 Nm +5%
119 Nm Stock 113 Nm
Stock
113 Nm
Stage 1
119 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Kawasaki Ninja 1100SX / SE (2025–) 1099 cc 4-Cylinder 136 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power136 HP146 HP152 HP
Power (kW)100 kW107 kW112 kW
Torque113 Nm119 Nm123 Nm
Power gain—+10 HP (+7%)+16 HP (+12%)
Torque gain—+6 Nm (+5%)+10 Nm (+9%)
Vehicle
Kawasaki Ninja 1100SX / SE (2025–)
Type
Motorcycle
Engines
1099 cc 4-Cylinder
Years
2025–present
Fuel
Petrol

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 8 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Motorcycle & ATV/UTV Software

On a motorcycle, ATV or UTV — this power is SENDE!!! too

03

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with exhaust and air filter

At Stage 2, the engine's breathing is freed up with hardware: the exhaust and air filter are upgraded, and the software is written to match that hardware. The target for this engine is 152 HP / 123 Nm.

  • Exhaust systemA slip-on or full exhaust system; the software is written for the exhaust fitted.
  • Air filterA high-flow sport air filter; the airbox inlet is modified if needed.
  • Datalog & fine-tuningAir/fuel ratio and ignition are logged during a road or off-road test; fine-tuning is done if needed.
  • Health checkIgnition, fuel system, clutch / CVT belt and cooling checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — ignition, air/fuel ratio and engine temperature are recorded and checked during a road or off-road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Kawasaki Ninja 1100SX / SE (2025–)

Other engines in the same generation

All engines table

No other engines are listed for this generation.

Other Ninja 1000SX / 1100SX generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 146 HP +10
Book an appointment