Legend Tuned · Chip Tuning

Chevrolet Camaro (Gen 6) 6.2 V8 SS 453 HP Chip Tuning

  • 2016–2024
  • Petrol
  • 453 HP · 617 Nm
  • ECU: GM E92

Target with Legend Tuned Stage 1: 475 HP / 645 Nm; with Stage 2: 500 HP / 675 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +22 HP +5%
475 HP Stock 453 HP · 333 → 349 kW
Stock
453 HP
Stage 1
475 HP
Torque +28 Nm +5%
645 Nm Stock 617 Nm
Stock
617 Nm
Stage 1
645 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Chevrolet Camaro (Gen 6) 6.2 V8 SS 453 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power453 HP475 HP500 HP
Power (kW)333 kW349 kW368 kW
Torque617 Nm645 Nm675 Nm
Power gain—+22 HP (+5%)+47 HP (+10%)
Torque gain—+28 Nm (+5%)+58 Nm (+9%)
Vehicle
Chevrolet Camaro (Gen 6)
Engines
6.2 V8 SS
Years
2016–2024
Fuel
Petrol
ECU
GM E92

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 12 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 500 HP / 675 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Chevrolet Camaro (Gen 6)

Other engines in the same generation

All engines table

Other Camaro generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 475 HP +22
Book an appointment