Legend Tuned · Chip Tuning

BMW 3 Series (F30/F31/F34) 320i ED 1.6 (N13) 170 HP Chip Tuning

  • 2012–2019
  • Petrol
  • 170 HP · 250 Nm
  • ECU: Bosch MEVD17.2

Target with Legend Tuned Stage 1: 220 HP / 315 Nm; with Stage 2: 240 HP / 340 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +50 HP +29%
220 HP Stock 170 HP · 125 → 162 kW
Stock
170 HP
Stage 1
220 HP
Torque +65 Nm +26%
315 Nm Stock 250 Nm
Stock
250 Nm
Stage 1
315 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

BMW 3 Series (F30/F31/F34) 320i ED 1.6 (N13) 170 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power170 HP220 HP240 HP
Power (kW)125 kW162 kW177 kW
Torque250 Nm315 Nm340 Nm
Power gain—+50 HP (+29%)+70 HP (+41%)
Torque gain—+65 Nm (+26%)+90 Nm (+36%)
Vehicle
BMW 3 Series (F30/F31/F34)
Engines
320i ED 1.6 (N13)
Years
2012–2019
Fuel
Petrol
ECU
Bosch MEVD17.2

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 10 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 240 HP / 340 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

BMW 3 Series (F30/F31/F34)

Other engines in the same generation

All engines table

Other 3 Series generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 220 HP +50
Book an appointment