Legend Tuned · ECU Software

Motorcycle

BMW Motorrad S 1000 XR (K69, 2020–2023) S 1000 XR 165 HP ECU Software & Chip Tuning

  • 2020–2023
  • Petrol
  • 165 HP · 114 Nm

Target with Legend Tuned Stage 1: 173 HP / 119 Nm; with Stage 2: 182 HP / 122 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +8 HP +5%
173 HP Stock 165 HP · 121 → 127 kW
Stock
165 HP
Stage 1
173 HP
Torque +5 Nm +4%
119 Nm Stock 114 Nm
Stock
114 Nm
Stage 1
119 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

BMW Motorrad S 1000 XR (K69, 2020–2023) 165 HP — stok ve Stage değerleri
Value Stock Stage 1 Stage 2
Power165 HP173 HP182 HP
Power (kW)121 kW127 kW134 kW
Torque114 Nm119 Nm122 Nm
Power gain—+8 HP (+5%)+17 HP (+10%)
Torque gain—+5 Nm (+4%)+8 Nm (+7%)
Vehicle
BMW Motorrad S 1000 XR (K69, 2020–2023)
Type
Motorcycle
Engines
S 1000 XR
Years
2020–2023
Fuel
Petrol

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 8 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with exhaust and air filter

At Stage 2, the engine's breathing is freed up with hardware: the exhaust and air filter are upgraded, and the software is written to match that hardware. The target for this engine is 182 HP / 122 Nm.

  • Exhaust systemA slip-on or full exhaust system; the software is written for the exhaust fitted.
  • Air filterA high-flow sport air filter; the airbox inlet is modified if needed.
  • Datalog & fine-tuningAir/fuel ratio and ignition are logged during a road or off-road test; fine-tuning is done if needed.
  • Health checkIgnition, fuel system, clutch / CVT belt and cooling checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — ignition, air/fuel ratio and engine temperature are recorded and checked during a road or off-road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

BMW Motorrad S 1000 XR (K69, 2020–2023)

Other engines in the same generation

All engines table

No other engines are listed for this generation.

Other S 1000 XR generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 173 HP +8
Book an appointment