Legend Tuned · Chip Tuning

Subaru WRX STI (VA) 2.5 Turbo STI 300 HP Chip Tuning

  • 2014–2018
  • Petrol
  • 300 HP · 407 Nm

Target with Legend Tuned Stage 1: 345 HP / 470 Nm; with Stage 2: 375 HP / 510 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +45 HP +15%
345 HP Stock 300 HP · 221 → 254 kW
Stock
300 HP
Stage 1
345 HP
Torque +63 Nm +15%
470 Nm Stock 407 Nm
Stock
407 Nm
Stage 1
470 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Subaru WRX STI (VA) 2.5 Turbo STI 300 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power300 HP345 HP375 HP
Power (kW)221 kW254 kW276 kW
Torque407 Nm470 Nm510 Nm
Power gain—+45 HP (+15%)+75 HP (+25%)
Torque gain—+63 Nm (+15%)+103 Nm (+25%)
Vehicle
Subaru WRX STI (VA)
Engines
2.5 Turbo STI
Years
2014–2018
Fuel
Petrol

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 8 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 375 HP / 510 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Subaru WRX STI (VA)

Other engines in the same generation

All engines table

No other engines are listed for this generation.

Other WRX / WRX STI generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 345 HP +45
Book an appointment