Legend Tuned · Chip Tuning

Škoda Superb 2 (3T) 1.6 TDI 105 HP Chip Tuning

  • 2008–2015
  • Diesel
  • 105 HP · 250 Nm
  • ECU: Siemens PCR2.1

Target with Legend Tuned Stage 1: 140 HP / 320 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +35 HP +33%
140 HP Stock 105 HP · 77 → 103 kW
Stock
105 HP
Stage 1
140 HP
Torque +70 Nm +28%
320 Nm Stock 250 Nm
Stock
250 Nm
Stage 1
320 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage 1 comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Škoda Superb 2 (3T) 1.6 TDI 105 HP — stock and Stage figures
Value Stock Stage 1
Power105 HP140 HP
Power (kW)77 kW103 kW
Torque250 Nm320 Nm
Power gain—+35 HP (+33%)
Torque gain—+70 Nm (+28%)
Vehicle
Škoda Superb 2 (3T)
Engines
1.6 TDI
Years
2008–2015
Fuel
Diesel
ECU
Siemens PCR2.1
Stage 2
Not listed for this engine

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 6 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Stage 2 hardware, peace of mind and process

After Stage 1

Stage 2 is not listed for this engine

There's no meaningful Stage 2 figure for this engine; most of the gain comes with Stage 1 software. For livelier throttle response and a deeper intake sound, you can complement Stage 1 with the Custom Sport Filter Kit.

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Škoda Superb 2 (3T)

Other engines in the same generation

All engines table

Other Superb generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 140 HP +35
Book an appointment