Legend Tuned · Chip Tuning

SEAT Leon 3 Facelift (5F) 1.6 TDI 115 HP Chip Tuning

  • 2017–2020
  • Diesel
  • 115 HP · 250 Nm
  • ECU: Delphi DCM6.2

Target with Legend Tuned Stage 1: 150 HP / 330 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +35 HP +30%
150 HP Stock 115 HP · 85 → 110 kW
Stock
115 HP
Stage 1
150 HP
Torque +80 Nm +32%
330 Nm Stock 250 Nm
Stock
250 Nm
Stage 1
330 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage 1 comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

SEAT Leon 3 Facelift (5F) 1.6 TDI 115 HP — stock and Stage figures
Value Stock Stage 1
Power115 HP150 HP
Power (kW)85 kW110 kW
Torque250 Nm330 Nm
Power gain—+35 HP (+30%)
Torque gain—+80 Nm (+32%)
Vehicle
SEAT Leon 3 Facelift (5F)
Engines
1.6 TDI
Years
2017–2020
Fuel
Diesel
ECU
Delphi DCM6.2
Stage 2
Not listed for this engine

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 10 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

04

Stage 2 hardware, peace of mind and process

After Stage 1

Stage 2 is not listed for this engine

There's no meaningful Stage 2 figure for this engine; most of the gain comes with Stage 1 software. For livelier throttle response and a deeper intake sound, you can complement Stage 1 with the Custom Sport Filter Kit.

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

SEAT Leon 3 Facelift (5F)

Other engines in the same generation

All engines table

Other Leon generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 150 HP +35
Book an appointment