Legend Tuned · Chip Tuning

Kia Ceed (ED) 1.6 CRDi 115 HP Chip Tuning

  • 2006–2012
  • Diesel
  • 115 HP · 255 Nm
  • ECU: Bosch EDC16C39

Target with Legend Tuned Stage 1: 145 HP / 310 Nm; with Stage 2: 155 HP / 330 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +30 HP +26%
145 HP Stock 115 HP · 85 → 107 kW
Stock
115 HP
Stage 1
145 HP
Torque +55 Nm +22%
310 Nm Stock 255 Nm
Stock
255 Nm
Stage 1
310 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Kia Ceed (ED) 1.6 CRDi 115 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power115 HP145 HP155 HP
Power (kW)85 kW107 kW114 kW
Torque255 Nm310 Nm330 Nm
Power gain—+30 HP (+26%)+40 HP (+35%)
Torque gain—+55 Nm (+22%)+75 Nm (+29%)
Vehicle
Kia Ceed (ED)
Engines
1.6 CRDi
Years
2006–2012
Fuel
Diesel
ECU
Bosch EDC16C39

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 5 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 155 HP / 330 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Kia Ceed (ED)

Other engines in the same generation

All engines table

Other Ceed generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 145 HP +30
Book an appointment