Legend Tuned · Chip Tuning

Chevrolet Corvette (C6) 6.2 V8 ZR1 647 HP Chip Tuning

  • 2005–2013
  • Petrol
  • 647 HP · 819 Nm
  • ECU: GM E38

Target with Legend Tuned Stage 1: 677 HP / 840 Nm; with Stage 2: 745 HP / 905 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.

Legend Tuned figures

Stage 1
Power +30 HP +5%
677 HP Stock 647 HP · 476 → 498 kW
Stock
647 HP
Stage 1
677 HP
Torque +21 Nm +3%
840 Nm Stock 819 Nm
Stock
819 Nm
Stage 1
840 Nm

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Power & torque curve

Stock vs Stage comparison

A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.

Technical figures

Chevrolet Corvette (C6) 6.2 V8 ZR1 647 HP — stock and Stage figures
Value Stock Stage 1 Stage 2
Power647 HP677 HP745 HP
Power (kW)476 kW498 kW548 kW
Torque819 Nm840 Nm905 Nm
Power gain—+30 HP (+5%)+98 HP (+15%)
Torque gain—+21 Nm (+3%)+86 Nm (+11%)
Vehicle
Chevrolet Corvette (C6)
Engines
6.2 V8 ZR1
Years
2005–2013
Fuel
Petrol
ECU
GM E38

Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.

Custom software · 9 options

Custom software options for this engine

Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.

Emission Systems

Emission system solutions for track and motorsport projects.

02

Stage 2 hardware, peace of mind and process

Stage 2 requirements

Stage 2 ready with the Custom Sport Filter Kit

At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 745 HP / 905 Nm.

  • Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
  • Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
  • Silicone boost hosesHoses and pipes that withstand the higher pressure.
  • Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).

Included every time

Power with peace of mind

  • Original software backup — the factory software is read and archived before the job.
  • Reversal — the car can be returned to its original software whenever you ask.
  • Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
  • Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
  • Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
  1. Book

    Tell us about your car and your goals; we'll plan the day and time together.

  2. Analysis & backup

    Fault memory is read, the ECU is identified and the original software is archived.

  3. Legend Tuned software

    Calibration tailored to the car (Stage 1: ~1–2 hours).

  4. Test & handover

    Verified with a road test + datalog, then handed over with a walkthrough of what was done.

Chevrolet Corvette (C6)

Other engines in the same generation

All engines table

Other Corvette generations

Vehicle Selector

Choose another vehicle

Start by selecting a make.

Stage 1 677 HP +30
Book an appointment