Legend Tuned · Chip Tuning
Audi A5 (8T) S5 3.0 TFSI 333 HP Chip Tuning
- 2007–2016
- Petrol
- 333 HP · 440 Nm
- ECU: Continental Simos 8
Target with Legend Tuned Stage 1: 435 HP / 520 Nm; with Stage 2: 475 HP / 560 Nm. The original software is backed up, the calibration is tailored to the car, and the result is verified by datalog.
Legend Tuned figures
Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.
Power & torque curve
Stock vs Stage comparison
A representative power and torque curve with a technical table of all figures. Hover over the chart to see values by rpm.
- Power · Stage 1
- Torque · Stage 1
- Power · Stock
- Torque · Stock
Technical figures
| Value | Stock | Stage 1 | Stage 2 |
|---|---|---|---|
| Power | 333 HP | 435 HP | 475 HP |
| Power (kW) | 245 kW | 320 kW | 349 kW |
| Torque | 440 Nm | 520 Nm | 560 Nm |
| Power gain | — | +102 HP (+31%) | +142 HP (+43%) |
| Torque gain | — | +80 Nm (+18%) | +120 Nm (+27%) |
Figures are examples/estimates and may vary with the car's mileage, maintenance condition, fuel quality and hardware. Exact results are determined by dyno/datalog.
Custom software · 11 options
Custom software options for this engine
Legend Tuned functions suitable for this engine, which can be applied in the same session as Stage software or on their own.
Emission Systems
Emission system solutions for track and motorsport projects.
- Catalytic Converter Delete (Cat Off) ECU software that prevents the check-engine light and power loss on cars with a removed or replaced catalytic converter.
- Rear Lambda/O2 Sensor Delete Software that turns off monitoring of the post-cat (rear) oxygen sensor to prevent the check-engine light on downpipe and sports cat setups.
Legal notice: Software for emission systems (catalytic converter, DPF/FAP, OPF, EGR, AdBlue/SCR, etc.) is intended solely for track / motorsport and closed-course use. Driving vehicles with these systems disabled on public roads, and presenting them for TÜVTÜRK inspection, may be against regulations. On request, the original software can be restored.
Driving & Sound Effects
Make yourself heard and be first off the line.
- Pops & Bangs (Crackle Map) Popular The signature pops and crackles from the exhaust when you lift off the throttle — intensity set to your taste.
- Launch Control Popular A software feature that holds the revs steady for standing starts, giving the fastest, most repeatable launches.
- Speed Limiter Removal Popular Software that removes or re-sets the electronically limited factory top speed (Vmax).
- Exhaust Valve Control Software and electronic solutions that decide when a valved exhaust opens and closes, based on drive mode, engine rpm or your preference.
- Cold Start Idle Delete A software adjustment that reduces the high, noisy idle speed on a cold start.
Transmission (TCU) Software
Faster shifts, sharper response, proper torque management.
- DSG / S tronic Software Popular Faster shifts, torque limits matched to the engine and a sharper driving character for dual-clutch DSG and S tronic gearboxes.
- Torque Limiter Removal Software that rearranges factory torque restrictions based on gear, speed or transmission, within the limits of the drivetrain.
Fault & Function Solutions
Permanent software fixes for annoying faults.
- Fault Code Deactivation Software that permanently disables unnecessary fault codes in the ECU for systems that have been removed or are no longer used.
- Permanent Start-Stop Delete A solution that permanently disables the start-stop system that switches itself on at every start, or makes it remember your last setting.
Stage 2 hardware, peace of mind and process
Stage 2 requirements
Stage 2 ready with the Custom Sport Filter Kit
At Stage 2, the engine's breathing is freed up with hardware, and the software is written to match that hardware. The target for this engine is 475 HP / 560 Nm.
- Air intakeThe made-to-measure Legend Custom Sport Filter Kit or an intake suited to the car.
- Intercooler & boostA vehicle-specific intercooler / blow-off valve to keep temperatures stable under sustained load.
- Silicone boost hosesHoses and pipes that withstand the higher pressure.
- Health checkIgnition, fuel system and clutch checked for this power level; the job takes ~4–8 hours (depending on parts fitted).
Included every time
Power with peace of mind
- Original software backup — the factory software is read and archived before the job.
- Reversal — the car can be returned to its original software whenever you ask.
- Datalog check — boost pressure, ignition and air/fuel ratio are recorded and checked on a road test.
- Vehicle-specific calibration — not an off-the-shelf file; tuned to the engine, hardware and fuel quality.
- Pre-tune diagnostics — fault memory is read and engine health is checked before the software.
-
Book
Tell us about your car and your goals; we'll plan the day and time together.
-
Analysis & backup
Fault memory is read, the ECU is identified and the original software is archived.
-
Legend Tuned software
Calibration tailored to the car (Stage 1: ~1–2 hours).
-
Test & handover
Verified with a road test + datalog, then handed over with a walkthrough of what was done.
Audi A5 (8T)
Other engines in the same generation
- Petrol 1.8 TFSI 160 → 210 HP +50
- Petrol 1.8 TFSI 170 → 215 HP +45
- Petrol 2.0 TFSI 180 → 260 HP +80
- Petrol 2.0 TFSI 211 → 260 HP +49
- Petrol 2.0 TFSI 225 → 300 HP +75
- Petrol 3.2 FSI 265 → 285 HP +20
- Petrol 3.0 TFSI 272 → 435 HP +163
- Petrol S5 4.2 FSI 354 → 375 HP +21
- Petrol RS5 4.2 FSI 450 → 470 HP +20
- Diesel 2.0 TDI 143 → 180 HP +37
- Diesel 2.0 TDI 150 → 190 HP +40
- Diesel 2.0 TDI 170 → 205 HP +35
- Diesel 2.0 TDI 177 → 215 HP +38
- Diesel 2.0 TDI 190 → 215 HP +25
- Diesel 2.7 TDI 190 → 235 HP +45
- Diesel 3.0 TDI 204 → 265 HP +61
- Diesel 3.0 TDI 240 → 300 HP +60
- Diesel 3.0 TDI 245 → 300 HP +55
Other A5 generations
Vehicle Selector